Two direction Auto Security Wing Turnstiles Gates With Biometric
■ Passing mode switching function: The entry and exit can be set independently【controlled mode】 /【
free mode 】/【 forbidden mode】
■ Anti-collision function: When the gate is locked, it can support the impulse force within
the safety range. The gate can be manually pushed slowly when it is
over the safety range, to protect the mechanism and pedestrian, and
then recovers automatically.
■ Compatibility: Equipped with the dry contact signal input interface, RS485/RS232
interface, TCP/IP interface (optional), compatible with all kinds
of access controllers.
■ Automatic reset function: The turnstile will open the gate after receiving the legal opening
signal when standby. The swing gate will return to the hindered
zero position automatically under the following situation:
(1) Within the allowed time, pedestrians have been detected in the
specified direction passing the passage;
(2) Over the allowed time, there is no people has been detected
passing in the passage.
Self-check function when power on: The system will self-check
routinely and alarm when the power is on,and intelligently detect
the key hardware and function. Find the hidden danger within the
■ Anti-clamping function:
(1) Anti-pinch by infrared sensor: Install multi-pair of infrared
sensors near the anti-pinch area where swing gate is moving. Once
people or thing is detected within the anti-pinch area, the swing
gate will automatically stop moving; until the people or thing
leaves the anti-pinch area, the swing gate will continue to move.
(2) Mechanical anti-pinch: The swing gate will automatically stop
moving when the swing gate encounter obstacles; the impulse force
is within the safety range when the swing gate is moving.
■ Intelligent linkage alarm: Illegal traffic events can be linked with other alarm monitoring
equipment: such as access control systems, video management
■ Self-recovery function: The swing gates do not return to the hindered zero position
because ofhuman intervention. After revoking human intervention,
the gate automatically return to the hindered zero position.
■ Automatic adjustment function: When the turnstiles need to re-adjust because of mechanical wear,
the main board can automatically adjust, Accurate and convenient.
|Driving motor||DC brushless motor|
|Method of position||Use the encoder to make sure the swing gate position|
|Method of motor control||Using high-performance DSP chip|
|Opening speed of swing gate||0.3-0.6s|
|The turning angle of swing gate||±90°|
|Housing material||304 grade stainless steel|
|Swing gate material||Organic glass|
|Surface treatment||Brushed finish|
|Control input/output||6 channels relay control output/ 4-channel dry contact signal input|
|Communication interface||RS485 / RS232；TCP/IP interface(customizable)|